Part Details | HEADLESS SHOULDER PIN
5315-00-145-1680 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 10940798, 5315-00-145-1680, 00-145-1680, 5315001451680, 001451680
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAR 28, 1969 | 00-145-1680 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
BOTH END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-145-1680
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10940798 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-00-145-1680
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.604 INCHES MINIMUM AND 0.644 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.750 INCHES NOMINAL |
| SHANK DIAMETER | 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| OVERALL LENGTH | 3.880 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | SHANK END |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.880 INCHES NOMINAL |
| SPECIAL FEATURES | NONE HOLE LOCATED IN SHOULDER 0.505 IN. DIA BY 1.120 IN. DEEP |