Part Details | HEADLESS SHOULDER PIN
5315-00-170-4989 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 345647P20, 5315-00-170-4989, 00-170-4989, 5315001704989, 001704989
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 07, 1973 | 00-170-4989 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
SHOULDER
Cross Reference | NSN 5315-00-170-4989
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 345647P20 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 5315-00-170-4989
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHOULDER DIAMETER | 0.192 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| OVERALL LENGTH | 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.385 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.333 INCHES MINIMUM AND 0.334 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.393 INCHES NOMINAL |
| THIRD STEP DIAMETER | 0.308 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.105 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | 7 CHAMFERED |
| SECOND END COUNTERBORE DIAMETER | 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| SECOND END COUNTERBORE DEPTH | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FIRST END LOCATION | SMALL END |