Part Details | HEADLESS SHOULDER PIN
5315-00-223-1986 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 677361, 5315-00-223-1986, 00-223-1986, 5315002231986, 002231986
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | OCT 24, 1970 | 00-223-1986 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
SHOULDER
Cross Reference | NSN 5315-00-223-1986
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 677361 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 5315-00-223-1986
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| SHANK DIAMETER | 0.12475 INCHES MINIMUM AND 0.12525 INCHES MAXIMUM |
| OVERALL LENGTH | 0.430 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.12475 INCHES MINIMUM AND 0.12525 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SECOND END TAPER ANGLE | 13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM |
| FIRST END LOCATION | BOTH ENDS |