Part Details | HEADLESS SHOULDER PIN
5315-00-245-8775 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 975415, 9754-15, 5315-00-245-8775, 00-245-8775, 5315002458775, 002458775
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 16, 1969 | 00-245-8775 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-245-8775
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9754-15 | 13002 | GOODRICH CORPORATIONDBA GOODRICH LANDING GEAR DIVISION |
Technical Data | NSN 5315-00-245-8775
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.422 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.4988 INCHES MINIMUM AND 0.4993 INCHES MAXIMUM |
| SHANK DIAMETER | 0.4375 INCHES NOMINAL |
| OVERALL LENGTH | 1.886 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.040 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | SHOULDER END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.422 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES NOMINAL |
| TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |