Part Details | HEADLESS STRAIGHT PIN
5315-00-253-4142 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: P32763, 5315-00-253-4142, 00-253-4142, 5315002534142, 002534142
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 28, 1969 | 00-253-4142 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-00-253-4142
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| P32763 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 5315-00-253-4142
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| SECOND END TAPER ANGLE | 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.750 INCHES MINIMUM AND 2.760 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 3.375 INCHES MINIMUM AND 3.395 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.6130 INCHES MINIMUM AND 0.6170 INCHES MAXIMUM |