Part Details | HEADLESS SHOULDER PIN
5315-00-304-2995 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 339132, 5315-00-304-2995, 00-304-2995, 5315003042995, 003042995
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-304-2995 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
SQUARE
SQUARE
UNDERCUT
Cross Reference | NSN 5315-00-304-2995
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 339132 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 5315-00-304-2995
| Characteristic | Specifications |
|---|---|
| SHEAR STRENGTH | 180000 SINGLE POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.610 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.434 INCHES MINIMUM AND 0.435 INCHES MAXIMUM |
| SHANK DIAMETER | 0.868 INCHES MINIMUM AND 0.869 INCHES MAXIMUM |
| OVERALL LENGTH | 4.000 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.688 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SECOND UNDERCUT WIDTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SECOND UNDERCUT DIAMETER | 0.688 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.868 INCHES MINIMUM AND 0.869 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 1.075 INCHES NOMINAL |
| FIRST END STYLE | SQUARE |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | BOTH ENDS |
| SPECIAL FEATURES | DIMENTIONS APPLY AFTER SOLID FILM LUB PLATING;PIN HAS TWO SHOULDERS, ONE ON EACH END AND A THIRD SHOULD THAT IS UNDERCUT IN THE CENTER |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, CREW DOOR HINGE |