Part Details | HEADLESS SHOULDER PIN
5315-00-335-4710 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 806348, 8329696, 5315-00-335-4710, 00-335-4710, 5315003354710, 003354710
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1961 | 00-335-4710 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
POINTED
CHAMFERED
POINTED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-335-4710
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 806348 | 34623 | AM GENERAL LLC |
| 8329696 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-00-335-4710
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM |
| SHOULDER WIDTH ACROSS FLATS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SHANK DIAMETER | 0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| OVERALL LENGTH | 5.300 INCHES MINIMUM AND 5.320 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.316 INCHES MINIMUM AND 0.319 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 2.550 INCHES MINIMUM AND 2.570 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 60.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | POINTED |
| FIRST END LOCATION | SHORT SHANK END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.180 INCHES NOMINAL |