Part Details | KNURLED STRAIGHT PIN
5315-00-345-3827 A headless, cylindrically-shaped, straight, solid item with or without a drilled hole(s). It has a straight or diamond knurl. Its length must not exceed 12 inches (304 MM). It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item.
Alternate Parts: 7267851, 1005003453827, 5315-00-345-3827, 00-345-3827, 5315003453827, 003453827
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-345-3827 | 33037 ( PIN, STRAIGHT, KNURLED ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END W/TWO DRILLED HOLES
Cross Reference | NSN 5315-00-345-3827
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7267851 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
| 1005003453827 | A00AM | E.C.A ETABLISSEMENT CENTRALDESAPPROVISIONNEMENTS DES FORCES |
Technical Data | NSN 5315-00-345-3827
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 11.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| FIRST HOLE DIAMETER | 0.085 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.085 INCHES NOMINAL |
| ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL |
| SPECIAL FEATURES | HEAT TREATMENT: HEAT AT 1540-1580DEG. F.,OIL QUENCH,TEMPER 30 MIN. AT HEAT TO ROCKWELL HARDNESS C42-C47; 1 PIN-7267851-3; 1 CAP-7267851-2; 1/2 STRAIGHT KNURL,40-60 PITCH |