Part Details | HEADLESS STRAIGHT PIN
5315-00-515-7134 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 5157134, 1015005157134, 10155157134, 1015-515-7134, 5315-00-515-7134, 00-515-7134, 5315005157134, 005157134
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-515-7134 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-00-515-7134
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5157134 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
| 1015005157134 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 1015-515-7134 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
Technical Data | NSN 5315-00-515-7134
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.140 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.140 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.172 INCHES MINIMUM AND 2.203 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 2.609 INCHES MINIMUM AND 2.641 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.5580 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM |