Part Details | HEADLESS SHOULDER PIN
5315-00-526-4087 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 14755203, 14-75520-3, 14755203, 14-75520-3, 5315-00-526-4087, 00-526-4087, 5315005264087, 005264087
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | AUG 25, 1974 | 00-526-4087 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
Cross Reference | NSN 5315-00-526-4087
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 14-75520-3 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN AEROSPACE |
| 14-75520-3 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES,INC. |
Technical Data | NSN 5315-00-526-4087
| Characteristic | Specifications |
|---|---|
| SHANK LENGTH | 0.390 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.2490 INCHES MINIMUM AND 0.2493 INCHES MAXIMUM |
| SHANK DIAMETER | 0.1876 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM |
| OVERALL LENGTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.140 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.040 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.093 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | SHOULDER END |
| SPECIAL FEATURES | SHANK IS OFFSET 0.020 IN. FROM CENTER OF SHOULDER; WHITE LACQUER-NITROCELLULOSE PAINT END OF SHOULDER PER P.S. FP-81 |