Part Details | HEADLESS SHOULDER PIN
5315-00-531-0581 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 5310581, 5315-00-531-0581, 00-531-0581, 5315005310581, 005310581
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-531-0581 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-531-0581
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5310581 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-00-531-0581
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.4390 INCHES MINIMUM AND 0.4395 INCHES MAXIMUM |
| SHANK DIAMETER | 0.2485 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM |
| OVERALL LENGTH | 3.031 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | BOTH ENDS |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.430 INCHES NOMINAL |
| SPECIAL FEATURES | BOTH SHANK ENDS CHAMFERED 0.031 IN. BY 45 DEG ON EDGES NOT CITED IN ABQL AND ABQM |
| CRITICALITY CODE JUSTIFICATION | AAAVH$$AAAZE |