Part Details | HEADLESS SHOULDER PIN
5315-00-535-6992 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 8162828, 5315-00-535-6992, 00-535-6992, 5315005356992, 005356992
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-535-6992 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
UNDERCUT
Cross Reference | NSN 5315-00-535-6992
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8162828 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 5315-00-535-6992
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.750 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| SHANK DIAMETER | 0.367 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| OVERALL LENGTH | 1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.306 INCHES MINIMUM AND 0.316 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.083 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.366 INCHES MINIMUM AND 0.371 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.667 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.031 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | SHANK END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.667 INCHES NOMINAL |