Part Details | NAIL
5315-00-543-3021 A headed and pointed fastening device designed for impact insertion. It has a round, square, or rectangular shank usually over 1 inch (25.4 mm) in length. Includes large nails commonly referred to as "spikes" and cupped head nails commonly referred to as "brads" or "finishing nails."
Alternate Parts: ASTMF1667, ASTM-F1667, FFN105, FF-N-105, FFN105 TY2ST11 SZ1 L X.181IN.D, FF-N-105 TY2ST11 SZ1 L X.181IN.D, ASTMF1667 NL CT M02, ASTM-F1667 NL CT M-02, HELYXC0NCRETESCREW, 5315-00-543-3021, 00-543-3021, 5315005433021, 005433021
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-543-3021 | 29631 ( NAIL ) |
REFERENCE DRAWINGS & PICTURES
OFFSET
BLUNT
Cross Reference | NSN 5315-00-543-3021
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| ASTM-F1667 | 81346 | AMERICAN SOCIETY FOR TESTING ANDMATERIALS |
| FF-N-105 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| FF-N-105 TY2ST11 SZ1 L X.181IN.D | 80244 | GENERAL SERVICES ADMINISTRATIONFEDERAL SUPPLY SERVICE |
| ASTM-F1667 NL CT M-02 | 80244 | GENERAL SERVICES ADMINISTRATIONFEDERAL SUPPLY SERVICE |
| HELYXC0NCRETESCREW | 74352 | HILLWOOD MFG CO |
Technical Data | NSN 5315-00-543-3021
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| FABRICATION METHOD | COLD FORMED |
| STERILIZED | NO |
| SHANK WIDTH | 0.181 INCHES NOMINAL |
| HEAD STYLE | 9 OFFSET |
| HEAD DIAMETER | 0.284 INCHES NOMINAL |
| POINT STYLE | 4 BLUNT |
| FASTENER LENGTH | 1.000 INCHES NOMINAL |
| DECORATIVE HEAD | NO |
| CAP MATERIAL | ANY ACCEPTABLE |
| SPECIAL FEATURES | ASTM-F1667, TABLE 17 REQUIREMENTS MODIFIED TO REQUIRE ROUND MECHANICALLY DEFORMED (FLUTED) SHANK IN LIEU OF MECHANICALLY DEFORMED FLAT STOCK SHANK |
| SUPPLEMENTARY FEATURES | CONCRETE |