Part Details | HEADLESS SHOULDER PIN
5315-00-547-9078 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 9010502, 90-1050-2, 5315-00-547-9078, 00-547-9078, 5315005479078, 005479078
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-547-9078 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-547-9078
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 90-1050-2 | 82918 | BOEING COMPANY, THEDBA BOEING |
Technical Data | NSN 5315-00-547-9078
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.380 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.625 INCHES NOMINAL |
| SHANK DIAMETER | 0.300 INCHES NOMINAL |
| OVERALL LENGTH | 2.750 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.4970 INCHES MINIMUM AND 0.4985 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 2.270 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.170 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| FIRST END LOCATION | SMALL END |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.101 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.154 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.260 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.260 INCHES NOMINAL |