Part Details | HEADLESS SHOULDER PIN
5315-00-586-9083 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 3552011, 355201-1, 3552011, 355201-1, 3552011, 355201-1, 3552011, 355201-1, 3552011, 355201-1, 3552011, 355201-1, 3552011, 355201-1, 5315-00-586-9083, 00-586-9083, 5315005869083, 005869083
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-586-9083 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-586-9083
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 355201-1 | 6Z800 | A AND M AEROSPACE, INC. |
| 355201-1 | 65506 | FEDERAL INDUSTRIES, INC. |
| 355201-1 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| 355201-1 | 30205 | MERCER PRODUCTS & MANUFACTURINGCOMPANY |
| 355201-1 | 66841 | PRECI-MANUFACTURING, INCORPORATED |
| 355201-1 | 93221 | TRIUMPH AEROSTRUCTURES, LLCDIV VOUGHT AIRCRAFT INDUSTRIES |
| 355201-1 | 93211 | TRIUMPH AEROSTRUCTURES, LLCDBA TRIUMPH AEROSTRUCTURES - VOUGHT |
Technical Data | NSN 5315-00-586-9083
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 1.650 INCHES NOMINAL |
| SHOULDER WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL |
| SHANK DIAMETER | 0.6226 INCHES MINIMUM AND 0.6239 INCHES MAXIMUM |
| OVERALL LENGTH | 3.320 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.7492 INCHES MINIMUM AND 0.7498 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 1.550 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.065 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.905 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 10.0 DEGREES NOMINAL |
| FIRST END LOCATION | THREADED END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.625 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.730 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL |