Part Details | HEADLESS STRAIGHT PIN
5315-00-590-4096 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: CV155645621, CV15-564562-1, 5315-00-590-4096, 00-590-4096, 5315005904096, 005904096
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-590-4096 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
DRILLED THRU CENTER
Cross Reference | NSN 5315-00-590-4096
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CV15-564562-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLCDBA TRIUMPH AEROSTRUCTURES - VOUGHT |
Technical Data | NSN 5315-00-590-4096
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| FIRST HOLE DIAMETER | 0.374 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 2.240 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-I-6870 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |