Part Details | HEADLESS SHOULDER PIN
5315-00-613-2036 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 6132036, 5315-00-613-2036, 00-613-2036, 5315006132036, 006132036
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-613-2036 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
SHOULDER
Cross Reference | NSN 5315-00-613-2036
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6132036 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
Technical Data | NSN 5315-00-613-2036
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| OVERALL LENGTH | 12.656 INCHES MINIMUM AND 12.688 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 4.750 INCHES NOMINAL |
| FIRST STEP LENGTH | 1.500 INCHES NOMINAL |
| SECOND STEP DIAMETER | 4.240 INCHES MINIMUM AND 4.250 INCHES MAXIMUM |
| SECOND STEP LENGTH | 1.4935 INCHES MINIMUM AND 1.5255 INCHES MAXIMUM |
| THIRD STEP DIAMETER | 1.093 INCHES NOMINAL |
| THIRD STEP LENGTH | 2.563 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 1.999 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 7.100 INCHES MINIMUM AND 7.120 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | UNTHREADED END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 1.500 INCHES |
| THREAD QUANTITY PER INCH | 12 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.206 INCHES NOMINAL |
| SPECIAL FEATURES | 4.750-12UN-3A X 1.500 LARGEST SHOULDER DIA WITH 0.172 DEEP X 0.406 W SLOT IN THREAD AND 0.125 DEEP X 0.250 W KEYSLOT FIRST END |