Part Details | HEADED STRAIGHT PIN
5315-00-617-7112 A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
Alternate Parts: 5315006177112, 7053607, 5315-00-617-7112, 00-617-7112, 5315006177112, 006177112
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 20, 1975 | 00-617-7112 | 02384 ( PIN, STRAIGHT, HEADED ) |
REFERENCE DRAWINGS & PICTURES
DEE CHAMFER
DRILLED THRU CENTER
STRAIGHT
Cross Reference | NSN 5315-00-617-7112
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5315006177112 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 7053607 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-00-617-7112
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | STRAIGHT |
| CHAMFER LENGTH | 0.156 INCHES NOMINAL |
| DIAMETER | 0.746 INCHES NOMINAL |
| UNDER HEAD LENGTH | 2.218 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| HEAD STYLE | DEE CHAMFER |
| DISTANCE FROM CENTERLINE TO FLAT | 0.781 INCHES NOMINAL |
| PIN HEAD DIAMETER | 0.937 INCHES NOMINAL |
| HEIGHT | 0.250 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| FIRST HOLE DIAMETER | 0.171 INCHES NOMINAL |
| TEST DATA DOCUMENT | 19207-7053607 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |