Part Details | HEADLESS SHOULDER PIN
5315-00-632-6741 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 9057371, 5315-00-632-6741, 00-632-6741, 5315006326741, 006326741
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-632-6741 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
POINTED
CHAMFERED
POINTED
UNDERCUT
Cross Reference | NSN 5315-00-632-6741
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9057371 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 5315-00-632-6741
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| SHANK DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| OVERALL LENGTH | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.188 INCHES NOMINAL |
| SECOND SHANK LENGTH | 0.729 INCHES MINIMUM AND 0.739 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | POINTED |
| SECOND END TAPER LENGTH | 0.095 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | LONG END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.376 INCHES NOMINAL |