Part Details | HEADLESS SHOULDER PIN
5315-00-664-9330 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 4034153, 5315-00-664-9330, 00-664-9330, 5315006649330, 006649330
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-664-9330 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-664-9330
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4034153 | 71379 | CESSNA AIRCRAFT COMPANYDBA TEXTRON AVIATION |
Technical Data | NSN 5315-00-664-9330
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| SHOULDER WIDTH ACROSS FLATS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| OVERALL LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SECOND END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FIRST END LOCATION | SHORT SHANK END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |