Part Details | HEADLESS SHOULDER PIN
5315-00-688-8066 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 1210571, 12-10571, 1210571, 12-10571, 1210571, 12-10571, 5315-00-688-8066, 00-688-8066, 5315006888066, 006888066
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1961 | 00-688-8066 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-688-8066
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12-10571 | 56705 | DONALLCO INC |
| 12-10571 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
| 12-10571 | 45934 | ONTIC ENGINEERING AND MANUFACTURING,INC. |
Technical Data | NSN 5315-00-688-8066
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| FIRST STEP DIAMETER | 0.4915 INCHES MINIMUM AND 0.4920 INCHES MAXIMUM |
| FIRST STEP LENGTH | 1.023 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.3120 INCHES MINIMUM AND 0.3123 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.7155 INCHES NOMINAL |
| THIRD STEP DIAMETER | 0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.3765 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | LARGE END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.3765 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| SPECIAL FEATURES | SHOULDER BORED AND GROOVED--BORE,0.250 IN. DIA AND 0.300 IN. DEEP,GROOVE,0.156 IN. WIDE AND 0.119 IN. DEEP; UNDERCUT,0.281 IN. DIA AND 0.062 IN. WIDE BETWEEN FIRST AND SECOND STEPS; AND UNDERCUT,0.130 TO 0.140 IN. DIA AND 0.047 IN. WIDE BETWEEN SECOND AND THIRD STEPS |