Part Details | HEADLESS SHOULDER PIN
5315-00-757-6303 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 8619711, 5315-00-757-6303, 00-757-6303, 5315007576303, 007576303
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 24, 1971 | 00-757-6303 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
UNDERCUT
Cross Reference | NSN 5315-00-757-6303
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8619711 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 5315-00-757-6303
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.327 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| SHANK DIAMETER | 0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| OVERALL LENGTH | 1.250 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.402 INCHES MINIMUM AND 0.417 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| SECOND UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| SECOND UNDERCUT DIAMETER | 0.402 INCHES MINIMUM AND 0.417 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.462 INCHES MINIMUM AND 0.467 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.547 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND 0.043 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | BOTH ENDS |
| SPECIAL FEATURES | 0.266 IN. DIA HOLE DRILLED LONGITUDINALLY THROUGH CENTER AXIS OF PIN |