Part Details | HEADLESS STRAIGHT PIN
5315-00-763-0125 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 13212E53581, 13212E5358-1, 5315-00-763-0125, 00-763-0125, 5315007630125, 007630125
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | APR 14, 1972 | 00-763-0125 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-00-763-0125
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13212E5358-1 | 97403 | CECOM LR CENTER |
Technical Data | NSN 5315-00-763-0125
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.090 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.500 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 18.0 DEGREES MINIMUM AND 22.0 DEGREES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.139 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.139 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.650 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.140 INCHES NOMINAL |
| PIN OVERALL LENGTH | 3.160 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.6170 INCHES MINIMUM AND 0.6330 INCHES MAXIMUM |