Part Details | HEADLESS SHOULDER PIN
5315-00-765-2137 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 7652137, 5315-00-765-2137, 00-765-2137, 5315007652137, 007652137
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1962 | 00-765-2137 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
UNDERCUT
Cross Reference | NSN 5315-00-765-2137
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7652137 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 5315-00-765-2137
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.313 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| SHANK DIAMETER | 0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| OVERALL LENGTH | 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.031 INCHES NOMINAL |
| SECOND UNDERCUT WIDTH | 0.031 INCHES NOMINAL |
| SECOND UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | THREADED END |
| SPECIAL FEATURES | HOLE 0.0120 DIA,1/8 INCH DEEP DRILLED IN CENTER OF SQUARE END |
| CRITICALITY CODE JUSTIFICATION | AABHP$$AABHP$$AABPA$$AAAVH$$AAAZE$$AAATR |