Part Details | HEADLESS SHOULDER PIN
5315-00-839-0814 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 3010464, 5315-00-839-0814, 00-839-0814, 5315008390814, 008390814
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 14, 1966 | 00-839-0814 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-839-0814
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3010464 | 00198 | PRATT & WHITNEY CANADA CIE DIVPRATT& WHITNEY CANADA CORP. |
Technical Data | NSN 5315-00-839-0814
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.450 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SHANK DIAMETER | 0.235 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| OVERALL LENGTH | 1.350 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.2395 INCHES MINIMUM AND 0.2400 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| SECOND END TAPER ANGLE | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| FIRST END LOCATION | SHORT SHANK END |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.160 INCHES NOMINAL |