Part Details | HEADLESS SHOULDER PIN
5315-00-924-8065 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 6510211030102, 65102-11030-102, 5315-00-924-8065, 00-924-8065, 5315009248065, 009248065
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 20, 1966 | 00-924-8065 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
DRILLED THRU CENTER
UNDERCUT
Cross Reference | NSN 5315-00-924-8065
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 65102-11030-102 | 78286 | SIKORSKY AIRCRAFT CORPORATIONDBA SIKORSKY |
Technical Data | NSN 5315-00-924-8065
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.500 INCHES NOMINAL |
| SHOULDER WIDTH ACROSS FLATS | 5.400 INCHES NOMINAL |
| SHANK DIAMETER | 0.875 INCHES NOMINAL |
| OVERALL LENGTH | 11.100 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.125 INCHES NOMINAL |
| SECOND UNDERCUT WIDTH | 0.125 INCHES NOMINAL |
| SECOND UNDERCUT DIAMETER | 0.750 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 1.750 INCHES NOMINAL |
| SECOND SHANK LENGTH | 0.302 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | THREADED END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.875 INCHES |
| THREAD QUANTITY PER INCH | 14 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.375 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| FIRST HOLE DIAMETER | 0.140 INCHES NOMINAL |