Part Details | HEADLESS SHOULDER PIN
5315-01-019-7219 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 4G13356105A, 4G13356-105A, 5315-01-019-7219, 01-019-7219, 5315010197219, 010197219
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | APR 19, 1976 | 01-019-7219 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END W/TWO DRILLED HOLES
SHOULDER
Cross Reference | NSN 5315-01-019-7219
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4G13356-105A | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 5315-01-019-7219
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.460 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.7485 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SHANK DIAMETER | 0.500 INCHES NOMINAL |
| OVERALL LENGTH | 5.470 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | THREADED END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.420 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.175 INCHES NOMINAL |
| ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL |
| SPECIAL FEATURES | HAS 0.438 IN. DIA,0.750 IN. DP HOLE CENTERED IN SHOULDER END BISECTED BY 0.208 IN. DIA PERPENDICULAR HOLES,2 IN LINE 0.201 IN. FROM END; OPPOSITE END OF SHOULDER HAS 2 PARALLEL FLATS,0.512 IN. W/BETWEEN FLATS |