Part Details | HEADLESS SHOULDER PIN
5315-01-023-3151 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: JYLC800, 5315-01-023-3151, 01-023-3151, 5315010233151, 010233151
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 14, 1976 | 01-023-3151 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
UNDERCUT
Cross Reference | NSN 5315-01-023-3151
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| JYLC800 | 05624 | GE AVIATION SYSTEMS LLCDBA GE AVIATION |
Technical Data | NSN 5315-01-023-3151
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.694 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.187 INCHES NOMINAL |
| SHANK DIAMETER | 0.0922 INCHES MINIMUM AND 0.0932 INCHES MAXIMUM |
| OVERALL LENGTH | 1.094 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
| SECOND UNDERCUT WIDTH | 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
| SECOND UNDERCUT DIAMETER | 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.0922 INCHES MINIMUM AND 0.0932 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.694 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | SHANK END |