Part Details | HEADLESS SHOULDER PIN
5315-01-043-9709 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 16S1809, 16S180-9, 16S1809, 16S180-9, 5315-01-043-9709, 01-043-9709, 5315010439709, 010439709
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 05, 1977 | 01-043-9709 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
ONE END W/TWO DRILLED HOLES
SHOULDER
Cross Reference | NSN 5315-01-043-9709
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 16S180-9 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| 16S180-9 | T0544 | TUSAS HAVACILIK VE UZAY SAN.A.S.DBA TURKISH AEROSPACE INDUSTRIES |
Technical Data | NSN 5315-01-043-9709
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.490 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.372 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| SHANK DIAMETER | 0.247 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| OVERALL LENGTH | 0.960 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | SHANK END |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.180 INCHES NOMINAL |
| ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL |
| SPECIAL FEATURES | SHOULDER FLAT FROM SHANK 2 SIDES 0.290 IN. LG,0.251 WIDE ACROSS |