Part Details | PIN-RIVET
5320-01-094-0873 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: TLD130425E, TLD130-4-25E, TLD130425E, TLD130-4-25E, ST3M350C425, ST3M350C4-25, TLD130425E, TLD130-4-25E, TLD130425E, TLD130-4-25E, TLD130425E, TLD130-4-25E, TLD130425E, TLD130-4-25E, TLD130425E, TLD130-4-25E, TLD130425E, TLD130-4-25E, 5320-01-094-0873, 01-094-0873, 5320010940873, 010940873
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 01, 1980 | 01-094-0873 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, TAPERED, THREADED
Cross Reference | NSN 5320-01-094-0873
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| TLD130-4-25E | C4293 | ALCOA FASTENING SYSTEMSFAIRCHILDFASTENERS EUROPE - VSD GMBH |
| TLD130-4-25E | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| ST3M350C4-25 | 76301 | BOEING COMPANY, THEDBA BOEING |
| TLD130-4-25E | 17446 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| TLD130-4-25E | 97928 | HUCK INTL INC |
| TLD130-4-25E | 59563 | REID PRODUCTS INC.DBA REID PRODUCTS |
| TLD130-4-25E | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| TLD130-4-25E | 80539 | SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP |
| TLD130-4-25E | 27624 | SPS TECHNOLOGIES, LLCDBA PB FASTENERS |
Technical Data | NSN 5320-01-094-0873
| Characteristic | Specifications |
|---|---|
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.465 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SHANK STYLE | PIN-RIVET, TAPERED, THREADED |
| FASTENER LENGTH | 1.933 INCHES MINIMUM AND 1.958 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3145 INCHES NOMINAL |
| TIP DIAMETER | 0.2851 INCHES NOMINAL |
| GRIP LENGTH | 1.552 INCHES MINIMUM AND 1.567 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 28 |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION | CETYL ALCOHOL AND DRY FILM |