Part Details | PIN-RIVET
5320-01-329-4278 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: HLT333FBA1013, HLT333FBA-10-13, HLT333FBA1013, HLT333FBA-10-13, HLT333FBA1013, HLT333FBA-10-13, HLT333FBA1013, HLT333FBA-10-13, HLT333FBA1013, HLT333FBA-10-13, 03A0871013, 03A087-10-13, HLT333FBA1013, HLT333FBA-10-13, HLT333FBA1013, HLT333FBA-10-13, HLT333FBA1013, HLT333FBA-10-13, 5320-01-329-4278, 01-329-4278, 5320013294278, 013294278
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | NOV 16, 1990 | 01-329-4278 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, STRAIGHT, THREADED
Cross Reference | NSN 5320-01-329-4278
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HLT333FBA-10-13 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HLT333FBA-10-13 | 73197 | HI-SHEAR CORPORATION |
| HLT333FBA-10-13 | 17446 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| HLT333FBA-10-13 | 97928 | HUCK INTL INC |
| HLT333FBA-10-13 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| 03A087-10-13 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN AEROSPACE |
| HLT333FBA-10-13 | 0PTK6 | SPS TECHNOLOGIES INC |
| HLT333FBA-10-13 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| HLT333FBA-10-13 | 06725 | SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES |
Technical Data | NSN 5320-01-329-4278
| Characteristic | Specifications |
|---|---|
| SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| FASTENER LENGTH | 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| GRIP LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.312 INCHES |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 24 |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| SPECIAL FEATURES | GRIT BLAST TOP OF HEADS; O-RING,SYNTHETIC RUBBER PER MIL-R-6855,CLASS 1,2,AND 3,AND MIL-R-3065,CLASS SB612E,TEMPERATURE RANGE-70 DEG TO 225 DEG F |