Part Details | PIN-RIVET
5320-01-393-1298 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: HLT333FBA68, HLT333FBA-6-8, HLT333FBA68, HLT333FBA-6-8, HLT333FBA68, HLT333FBA-6-8, HLT333FBA68, HLT333FBA-6-8, HLT333FBA68, HLT333FBA-6-8, 03A08768, 03A087-6-8, HLT333FBA68, HLT333FBA-6-8, HLT333FBA68, HLT333FBA-6-8, HLT333FBA68, HLT333FBA-6-8, 5320-01-393-1298, 01-393-1298, 5320013931298, 013931298
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 14, 1994 | 01-393-1298 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, STRAIGHT, THREADED
Cross Reference | NSN 5320-01-393-1298
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HLT333FBA-6-8 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HLT333FBA-6-8 | 73197 | HI-SHEAR CORPORATION |
| HLT333FBA-6-8 | 17446 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| HLT333FBA-6-8 | 97928 | HUCK INTL INC |
| HLT333FBA-6-8 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| 03A087-6-8 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN AEROSPACE |
| HLT333FBA-6-8 | 0PTK6 | SPS TECHNOLOGIES INC |
| HLT333FBA-6-8 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| HLT333FBA-6-8 | 06725 | SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES |
Technical Data | NSN 5320-01-393-1298
| Characteristic | Specifications |
|---|---|
| MINIMUM TENSILE STRENGTH | 1410 POUNDS PER SQUARE INCH |
| SHEAR STRENGTH | 5380 DOUBLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.3765 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| FASTENER LENGTH | 0.815 INCHES MINIMUM AND 0.835 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
| SHANK DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| GRIP LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION | CETYL ALCOHOL, SPEC 305, HI-SHEAR CORP |
| SPECIAL FEATURES | GRIT BLAST TOP OF HEAD. O-RING UNDER HEAD, SYNTHETIC RUBBER PER MIL-R-6855, CLASS 1, 2, AND 3, AND MIL-R-3065, CLASS SB612E, TEMPERATURE RANGE-70 DEGREES TO +225 DEGREES F. |
| SPECIFICATION/STANDARD DATA | 73197-HLT333 MANUFACTURERS STANDARD |