Part Details | PIN-RIVET
5320-01-505-0894 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: HL221PN1022, HL221PN-10-22, HL221PN1022, HL221PN-10-22, HL221PB1022, HL221PB-10-22, HL221PN1022, HL221PN-10-22, HL221PN1022, HL221PN-10-22, 5320-01-505-0894, 01-505-0894, 5320015050894, 015050894
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 21, 2003 | 01-505-0894 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, STRAIGHT, THREADED
Cross Reference | NSN 5320-01-505-0894
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HL221PN-10-22 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HL221PN-10-22 | 73197 | HI-SHEAR CORPORATION |
| HL221PB-10-22 | 73197 | HI-SHEAR CORPORATION |
| HL221PN-10-22 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| HL221PN-10-22 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
Technical Data | NSN 5320-01-505-0894
| Characteristic | Specifications |
|---|---|
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| SHEAR STRENGTH | 17600 DOUBLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.6287 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| WIDTH BETWEEN FLATS | 0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3422 INCHES MINIMUM AND 0.3432 INCHES MAXIMUM |
| GRIP LENGTH | 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.3125 INCHES |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 24 |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | NON-LUBED PINS MUST BE USED WITH WET SEALANTORLUBEDCOLLAR |
| END ITEM IDENTIFICATION | A-10 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PINCOTS ITEM |