Part Details | PIN-RIVET
5320-01-505-0933 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
Alternate Parts: HL221PN820, HL221PN-8-20, HL221PN820, HL221PN-8-20, HL221PB820, HL221PB-8-20, HL221PN820, HL221PN-8-20, HL221PN820, HL221PN-8-20, 5320-01-505-0933, 01-505-0933, 5320015050933, 015050933
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 21, 2003 | 01-505-0933 | 67165 ( PIN-RIVET ) |
REFERENCE DRAWINGS & PICTURES
FLUSH COUNTERSUNK
PIN-RIVET, STRAIGHT, THREADED
Cross Reference | NSN 5320-01-505-0933
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HL221PN-8-20 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HL221PN-8-20 | 73197 | HI-SHEAR CORPORATION |
| HL221PB-8-20 | 73197 | HI-SHEAR CORPORATION |
| HL221PN-8-20 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| HL221PN-8-20 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
Technical Data | NSN 5320-01-505-0933
| Characteristic | Specifications |
|---|---|
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| SHEAR STRENGTH | 11800 DOUBLE POUNDS PER SQUARE INCH |
| HEAD STYLE | FLUSH COUNTERSUNK |
| HEAD MAJOR DIAMETER | 0.5018 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| WIDTH BETWEEN FLATS | 0.0947 INCHES MINIMUM AND 0.0967 INCHES MAXIMUM |
| SHANK DIAMETER | 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM |
| GRIP LENGTH | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD CLASS | 3A |
| THREAD QUANTITY PER INCH | 28 |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | NON-LUBED PINS MUST BE USED WITH WET SEALANTORLUBEDCOLLAR |
| END ITEM IDENTIFICATION | A-10 |