Part Details | WIPER RING
5330-00-640-8558 A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. It is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. Excludes PACKING, PREFORMED; RING, PISTON; and SEAL RING, METAL.
Alternate Parts: AN6231A3, AN62313, AN6231-3, FWR3C3, FWR-3C-3, DRI3, DRI-3, GI11713, GI1171-3, G3, G-3, OAS3, OAS-3, ISR3, ISR-3, MILS5049, MS28776M23, MS28776M2-3, 756 269, SRC3, SRC-3, S303953, S30395-3, 5330-00-640-8558, 00-640-8558, 5330006408558, 006408558
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-640-8558 | 20256 ( RING, WIPER ) |
REFERENCE DRAWINGS & PICTURES
OUTSIDE GROOVED, STRAIGHT FACE
CONCENTRIC
DIAGONAL JOINT
Cross Reference | NSN 5330-00-640-8558
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AN6231A3 | 88044 | AERONAUTICAL STANDARDS GROUPDEPT OF NAVY AND AIR FORCE |
| AN6231-3 | 88044 | AERONAUTICAL STANDARDS GROUPDEPT OF NAVY AND AIR FORCE |
| FWR-3C-3 | 83905 | AMERICAN BILTRITE INC TAPE PRODUCTSDIV |
| DRI-3 | 30438 | DELTA MFG AND SALES INC |
| GI1171-3 | 96679 | GADJETS INCDBA ASSOCIATED TECHNICAL SALES |
| G-3 | 72637 | GAYLE GEORGE W AND SON |
| OAS-3 | 26303 | GREENE TWEED AND COADVANTEC DIV |
| ISR-3 | 95725 | INDUSTRIAL SUPPLIES |
| MILS5049 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MS28776M2-3 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| 756 269 | 77294 | PIPER AIRCRAFT INC. |
| SRC-3 | 25942 | SCRAPPER RINGS CODIV OF ROBERTS TOOL CO |
| S30395-3 | 97820 | SHAMBAN POLYMER TECH GROUP |
Technical Data | NSN 5330-00-640-8558
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | OUTSIDE GROOVED, STRAIGHT FACE |
| JOINT STYLE | DIAGONAL JOINT |
| RING STYLE | CONCENTRIC |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.860 INCHES MINIMUM AND 0.865 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| OUTER EDGE THICKNESS | 0.084 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81349-MIL-S-5049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | M TYPE AND 2 CLASS |