Part Details | WIRE WOUND FIXED RESISTOR
5905-00-196-6801 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: 9120336, 912033-6, RH5R012F, 5905-00-196-6801, 00-196-6801, 5905001966801, 001966801
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | DEC 19, 1971 | 00-196-6801 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-196-6801
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 912033-6 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
| RH5R012F | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
Technical Data | NSN 5905-00-196-6801
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 0.012 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M150.0/P150.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P25.0 |
| INCLOSURE METHOD | ENCASED |
| STYLE DESIGNATOR | 48 AXIAL TERMINAL EACH END |
| BODY LENGTH | 0.600 INCHES NOMINAL |
| BODY WIDTH | 0.334 INCHES NOMINAL |
| BODY HEIGHT | 0.320 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.444 INCHES NOMINAL |
| MOUNTING HOLE SIZE | 0.093 INCHES NOMINAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.262 INCHES NOMINAL |
| TEST DATA DOCUMENT | 06481-912033 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| HEAT SINK MATERIAL | ALUMINUM ALLOY |
| HEAT SINK LENGTH | 6.000 INCHES |
| HEAT SINK WIDTH | 4.000 INCHES |
| HEAT SINK HEIGHT | 2.000 INCHES |
| HEAT SINK THICKNESS | 0.040 INCHES |