Part Details | FILM FIXED RESISTOR
5905-00-229-7590 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
Alternate Parts: CG14 26R8F, CG1-4 26R8F, 53151126, 531511-26, CG14 26R8F, CG1-4 26R8F, 5905-00-229-7590, 00-229-7590, 5905002297590, 002297590
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAR 10, 1971 | 00-229-7590 | 05311 ( RESISTOR, FIXED, FILM ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-229-7590
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CG1-4 26R8F | 96214 | RAYTHEON COMPANYDBA RAYTHEON |
| 531511-26 | 96214 | RAYTHEON COMPANYDBA RAYTHEON |
| CG1-4 26R8F | 01295 | TEXAS INSTRUMENTS INCORPORATEDDBA TEXAS INSTRUMENTS |
Technical Data | NSN 5905-00-229-7590
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 18.200 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 0.250 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 165.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M225.0/P0.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M65.0/P165.0 |
| INCLOSURE METHOD | HERMETICALLY SEALED |
| STYLE DESIGNATOR | 4 AXIAL TERMINAL EACH END |
| BODY DIAMETER | 0.125 INCHES NOMINAL |
| BODY LENGTH | 0.375 INCHES NOMINAL |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 96214-531511 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |