Part Details | WIRE WOUND FIXED RESISTOR
5905-00-233-3426 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: 172A1012, HL95ZX000K0R375F, HL95Z, HL9509Z .375 OHM 1%, HL-95-09Z .375 OHM 1%, 5905-00-233-3426, 00-233-3426, 5905002333426, 002333426
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 04, 1970 | 00-233-3426 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-233-3426
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 172A1012 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
| HL95ZX000K0R375F | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
| HL95Z | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
| HL-95-09Z .375 OHM 1% | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
Technical Data | NSN 5905-00-233-3426
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 0.375 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 95.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M30.0/P30.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P350.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 2 AXIAL TERMINAL EACH END |
| BODY LENGTH | 5.938 INCHES MINIMUM AND 6.063 INCHES MAXIMUM |
| BODY WIDTH | 1.188 INCHES MAXIMUM |
| BODY HEIGHT | 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 6.719 INCHES MINIMUM AND 6.781 INCHES MAXIMUM |
| MOUNTING HOLE SIZE | 0.196 INCHES NOMINAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| TERMINAL WIDTH | 0.250 INCHES NOMINAL |
| CUBIC MEASURE | 4.100 CUBIC INCHES |