Part Details | COMPOSITION FIXED RESISTOR
5905-00-279-2651 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also ATTENUATOR, FIXED; RESISTOR, FIXED, FILM; and RESISTOR, THERMAL. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: RES 820U00 005% 0001W AG06X014, 5N510202271, 5N5102-022-71, 311003061, 311-003-061, RC32GF821J, MILR116, MIL-R-11/6, 4114125, 411-4125, 4171302094, 4171302-094, 5905-00-279-2651, 00-279-2651, 5905002792651, 002792651
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-279-2651 | 00126 ( RESISTOR, FIXED, COMPOSITION ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-279-2651
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RES 820U00 005% 0001W AG06X014 | F3033 | DIRECTION CENTRALE DU MATERIEL DEL'ARMEE DE L'AIR DCMAA |
| 5N5102-022-71 | D1901 | HENSOLDT SENSORS GMBHDIV SEPS |
| 311-003-061 | 07421 | INTERSTATE ELECTRONICS CORPORATIONDBA L-3 INTERSTATE ELECTRONICS |
| RC32GF821J | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-R-11/6 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 411-4125 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 4171302-094 | 05869 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 5905-00-279-2651
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 820.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M5.000/P5.000 |
| POWER DISSIPATION RATING IN WATTS | 1.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 130.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 4 AXIAL TERMINAL EACH END |
| BODY DIAMETER | 0.210 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| BODY LENGTH | 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 1.375 INCHES MINIMUM AND 1.325 INCHES MAXIMUM |
| CUBIC MEASURE | 0.022 CUBIC INCHES |
| TEST DATA DOCUMENT | 81349-MIL-R-11 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-11 TO 6 GOVERNMENT SPECIFICATION |
| UNPACKAGED UNIT WEIGHT | 0.3 GRAMS |