Part Details | INDUCTIVE WIRE WOUND FIXED RESISTOR
5905-00-284-8212 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
Alternate Parts: RE60GR511, RER60FR511R, MILR390091, MIL-R-39009/1, 5905-00-284-8212, 00-284-8212, 5905002848212, 002848212
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 31, 1973 | 00-284-8212 | 37403 ( RESISTOR, FIXED, WIRE WOUND, INDUCTIVE ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-284-8212
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RE60GR511 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| RER60FR511R | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-R-39009/1 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5905-00-284-8212
| Characteristic | Specifications |
|---|---|
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-39009 TO 1 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CUBIC MEASURE | 0.069 CUBIC INCHES |
| TERMINAL WIDTH | 0.085 INCHES MINIMUM |
| TERMINAL LENGTH | 0.204 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| RELIABILITY INDICATOR | ESTABLISHED |
| TERMINAL TYPE | TAB, SOLDER LUG |
| MOUNTING HOLE SIZE | 0.008 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.434 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| BODY HEIGHT | 0.289 INCHES MINIMUM AND 0.351 INCHES MAXIMUM |
| BODY WIDTH | 0.272 INCHES MINIMUM AND 0.396 INCHES MAXIMUM |
| BODY LENGTH | 0.538 INCHES MINIMUM AND 0.662 INCHES MAXIMUM |
| STYLE DESIGNATOR | 48 AXIAL TERMINAL EACH END |
| INCLOSURE METHOD | ENCASED |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M100.0/P100.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| ELECTRICAL RESISTANCE | 0.511 OHMS |