Part Details | INDUCTIVE WIRE WOUND FIXED RESISTOR
5905-00-306-2007 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
Alternate Parts: 338343432, 338343-432, RER70F2611R, RER70F2611M, MILR390091, MIL-R-39009/1, 5905-00-306-2007, 00-306-2007, 5905003062007, 003062007
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | OCT 21, 1973 | 00-306-2007 | 37403 ( RESISTOR, FIXED, WIRE WOUND, INDUCTIVE ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-306-2007
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 338343-432 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| RER70F2611R | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| RER70F2611M | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-R-39009/1 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5905-00-306-2007
| Characteristic | Specifications |
|---|---|
| UNPACKAGED UNIT WEIGHT | 15.0 GRAMS |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-39009 TO 1 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CUBIC MEASURE | 0.317 CUBIC INCHES |
| TERMINAL WIDTH | 0.140 INCHES MINIMUM |
| TERMINAL LENGTH | 0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| RELIABILITY INDICATOR | ESTABLISHED |
| TERMINAL TYPE | TAB, SOLDER LUG |
| MOUNTING HOLE SIZE | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.709 INCHES MINIMUM AND 0.729 INCHES MAXIMUM |
| BODY HEIGHT | 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| BODY WIDTH | 0.469 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| BODY LENGTH | 1.000 INCHES MINIMUM AND 1.124 INCHES MAXIMUM |
| STYLE DESIGNATOR | 48 AXIAL TERMINAL EACH END |
| INCLOSURE METHOD | ENCAPSULATED |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M30.0/P30.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| POWER DISSIPATION RATING IN WATTS | 8.000 FREE AIR |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| ELECTRICAL RESISTANCE | 2.610 KILOHMS |