Part Details | NONPRECISION NONWIRE WOUND VARIABLE RESISTOR
5905-00-458-7141 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Alternate Parts: 39175, 311052900, 311-0529-00, 5905-00-458-7141, 00-458-7141, 5905004587141, 004587141
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | DEC 29, 1969 | 00-458-7141 | 37405 ( RESISTOR, VARIABLE, NONWIRE WOUND, NONPRECISION ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL BUSHING MOUNTED
ROUND, STEPPED
Cross Reference | NSN 5905-00-458-7141
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 39175 | 34263 | CTS CORP IN TEXAS DBA CTSELECTRONICS CORP BROWNSVILLE DIV |
| 311-0529-00 | 80009 | TEKTRONIX, INC.DBA TEKTRONIX |
Technical Data | NSN 5905-00-458-7141
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 2 |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO +10.0 ALL SECTIONS |
| SHAFT BEARING TYPE | BEARING |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 ALL SECTIONS |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| BODY DIAMETER | 0.938 INCHES MAXIMUM |
| BODY LENGTH | 0.875 INCHES MAXIMUM |
| MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND, STEPPED |
| SHAFT DIAMETER | 0.275 INCHES NOMINAL |
| SHAFT LENGTH | 0.875 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.187 INCHES NOMINAL |
| UNDERCUT LENGTH | 0.500 INCHES NOMINAL |
| NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| NONTURN DEVICE RADIUS | 0.438 INCHES NOMINAL |
| MOUNTING METHOD | JN ANY ACCEPTABLE AND CX ANY ACCEPTABLE |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| TERMINAL TYPE AND QUANTITY | 6 PIN |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| TERMINAL LOCATION | REAR END |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| OVERALL LENGTH | 2.125 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.938 INCHES MAXIMUM |