Part Details | WIRE WOUND FIXED RESISTOR
5905-00-458-9271 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: 233B795D750Y, TM50 75OHMSPORM1PCT, 5905-00-458-9271, 00-458-9271, 5905004589271, 004589271
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 02, 1970 | 00-458-9271 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-458-9271
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 233B795D750Y | 30221 | GENERAL ELECTRIC COARMAMENT AND ELECTRICAL SYSTEMS DEPT |
| TM50 75OHMSPORM1PCT | 15915 | TEPRO OF FLORIDA, INC.DIV TEPRO OF FLORIDA |
Technical Data | NSN 5905-00-458-9271
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 75.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 50.000 HEAT SINK |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 270.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M50.0/P50.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| INCLOSURE METHOD | ENCASED |
| STYLE DESIGNATOR | 48 AXIAL TERMINAL EACH END |
| BODY LENGTH | 1.969 INCHES NOMINAL |
| BODY HEIGHT | 0.625 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.563 INCHES NOMINAL |
| MOUNTING HOLE SIZE | 0.125 INCHES NOMINAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| REACTANCE CHARACTERISTIC | INDUCTIVE |
| TERMINAL LENGTH | 0.406 INCHES NOMINAL |
| TEST DATA DOCUMENT | 29902-233B795 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| HEAT SINK MATERIAL | ALUMINUM ALLOY |
| HEAT SINK LENGTH | 12.000 INCHES |
| HEAT SINK WIDTH | 12.000 INCHES |
| HEAT SINK THICKNESS | 0.041 INCHES |