Part Details | NONPRECISION WIRE WOUND VARIABLE RESISTOR
5905-00-475-4254 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Alternate Parts: 751559, 751559, 751559, 751559, 5905-00-475-4254, 00-475-4254, 5905004754254, 004754254
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-475-4254 | 37406 ( RESISTOR, VARIABLE, WIRE WOUND, NONPRECISION ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL SERVO MOUNTED
ROUND, FLATTED
Cross Reference | NSN 5905-00-475-4254
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 751559 | 96791 | BUNKER RAMO CORPAMPHENOL CONTROLS DIV |
| 751559 | 98659 | DONEL SYSTEMS, LLC |
| 751559 | 80045 | L-3 COMMUNICATIONS CINCINNATIELECTRONICS CORPORATION |
| 751559 | 04454 | SENSOR SYSTEMS, L.L.C. |
Technical Data | NSN 5905-00-475-4254
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 1 |
| ELECTRICAL RESISTANCE PER SECTION | 14.0 KILOHMS SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO +10.0 SINGLE SECTION |
| MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 1.50 INCH-OUNCES |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO +50.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 80.0 SINGLE SECTION |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 7000.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -2.0 TO +2.0 OHMS SINGLE SECTION |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| PILOT DIAMETER | 1.2500 INCHES NOMINAL |
| PILOT LENGTH | 0.6200 INCHES NOMINAL |
| UNDERCUT DIAMETER | 3.500 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.6200 INCHES NOMINAL |
| BODY DIAMETER | 5.000 INCHES NOMINAL |
| BODY LENGTH | 1.812 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 5.0000 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.6200 INCHES NOMINAL |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 3.500 INCHES NOMINAL |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND, FLATTED |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL |
| FLAT HEIGHT | 0.219 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.656 INCHES NOMINAL |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| MOUNTING METHOD | THREADED HOLE |
| MOUNTING FACILITY QUANTITY | 3 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| TERMINAL TYPE AND QUANTITY | 4 TURRET |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 80045-751559 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |