Part Details | FILM FIXED RESISTOR
5905-00-483-3758 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
Alternate Parts: 35B5PG, 06770005, 0677-0005, 06770005, 0677-0005, 5905-00-483-3758, 00-483-3758, 5905004833758, 004833758
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | FEB 12, 1971 | 00-483-3758 | 05311 ( RESISTOR, FIXED, FILM ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-483-3758
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 35B5PG | 11237 | CTS CORP OF CALIFORNIA DBA CTSELECTRONICS CORP PASO ROBLES DIV |
| 0677-0005 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 0677-0005 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. |
Technical Data | NSN 5905-00-483-3758
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 35.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M5.000/P5.000 |
| POWER DISSIPATION RATING IN WATTS | 0.125 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M300.0/P300.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | P0.0/P65.0 |
| INCLOSURE METHOD | HERMETICALLY SEALED |
| STYLE DESIGNATOR | 93 AXIAL TERMINAL EACH END |
| BODY DIAMETER | 0.100 INCHES NOMINAL |
| BODY LENGTH | 0.062 INCHES NOMINAL |
| TERMINAL TYPE | |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.062 INCHES NOMINAL |
| TEST DATA DOCUMENT | 28480-0677-0005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |