Part Details | PRECISION NONWIRE WOUND VARIABLE RESISTOR
5905-00-622-1527 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Alternate Parts: PVR11K553, PVR11-K553, 5290, 9141051, 914105-1, 5290, 5905-00-622-1527, 00-622-1527, 5905006221527, 006221527
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | FEB 27, 1975 | 00-622-1527 | 37407 ( RESISTOR, VARIABLE, NONWIRE WOUND, PRECISION ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL BUSHING MOUNTED
ROUND, FLATTED
Cross Reference | NSN 5905-00-622-1527
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| PVR11-K553 | 99957 | BOWMAR/TIC INCSUB OF BOWMAR INSTRUMENT CORP |
| 5290 | 10112 | GENERAL DYNAMICS GLOBAL IMAGINGTECHNOLOGIES, INC. |
| 914105-1 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
| 5290 | 04454 | SENSOR SYSTEMS, L.L.C. |
Technical Data | NSN 5905-00-622-1527
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 2 |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0 TO +2.0 ALL SECTIONS |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO +0.10 SINGLE SECTION |
| SHAFT BEARING TYPE | SLEEVE |
| MAXIMUM STOP TORQUE | 160.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO +100.0 ALL SECTIONS |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| BODY DIAMETER | 2.000 INCHES MAXIMUM |
| BODY LENGTH | 2.000 INCHES MAXIMUM |
| MOUNTING BUSHING LENGTH | 0.469 INCHES NOMINAL |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND, FLATTED |
| FIRST FLAT LENGTH | 0.487 INCHES NOMINAL |
| FLAT HEIGHT | 0.220 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 1.036 INCHES NOMINAL |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 305.0 NOMINAL |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL |
| NONTURN DEVICE LOCATION | AT 6 OCLOCK |
| NONTURN DEVICE RADIUS | 0.437 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL AND SWITCH |
| SWITCH TYPE | ROTARY |
| SWITCH OPERATING POSITION | END OF ROTATION |
| SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| SWITCH CURRENT TYPE AND RATING IN AMPS | 4.000 DC |
| SWITCH VOLTAGE RATING IN VOLTS | 28.0 |
| TERMINAL TYPE AND QUANTITY | 8 TURRET |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 06481-914105 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| OVERALL LENGTH | 3.046 INCHES MAXIMUM |
| OVERALL DIAMETER | 2.000 INCHES MAXIMUM |