Part Details | COMPOSITION FIXED RESISTOR
5905-00-723-9112 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also ATTENUATOR, FIXED; RESISTOR, FIXED, FILM; and RESISTOR, THERMAL. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: SP450HM100W, 887SP450K, 887SP450F, G310060S1, 887SP450K, 887SP450F, 778SP024, 778SP-024, 5905-00-723-9112, 00-723-9112, 5905007239112, 007239112
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1960 | 00-723-9112 | 00126 ( RESISTOR, FIXED, COMPOSITION ) |
REFERENCE DRAWINGS & PICTURES
TERMINALS ONE END
Cross Reference | NSN 5905-00-723-9112
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SP450HM100W | 07521 | CARBORUNDUM CO THEREFRACTORIES DIV |
| 887SP450K | 10646 | CESIWID INC |
| 887SP450F | 10646 | CESIWID INC |
| G310060S1 | 24930 | HARRIS CORPORATIONDBA ELECTRONIC SYSTEMS, RADAR |
| 887SP450K | 72819 | SANDVIK WIRE AND HEATING TECHNOLOGYCORPORATION |
| 887SP450F | 72819 | SANDVIK WIRE AND HEATING TECHNOLOGYCORPORATION |
| 778SP-024 | 72819 | SANDVIK WIRE AND HEATING TECHNOLOGYCORPORATION |
Technical Data | NSN 5905-00-723-9112
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 45.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M10.000/P10.000 |
| POWER DISSIPATION RATING IN WATTS | 100.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 40.0 |
| INCLOSURE METHOD | UNINCLOSED |
| STYLE DESIGNATOR | 9 TERMINALS ONE END |
| BODY DIAMETER | 1.000 INCHES NOMINAL |
| BODY LENGTH | 5.000 INCHES NOMINAL |
| TERMINAL TYPE | FERRULE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| TEST DATA DOCUMENT | 24930-G310060S1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |