Part Details | FILM FIXED RESISTOR
5905-00-830-4616 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
Alternate Parts: 577R072H27, MEAT910052B, MEAT9-10052B, MEA1005K01T9, MEA100-5K0-1T9, 5905-00-830-4616, 00-830-4616, 5905008304616, 008304616
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | SEP 01, 1967 | 00-830-4616 | 05311 ( RESISTOR, FIXED, FILM ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-830-4616
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 577R072H27 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN SYSTEMS |
| MEAT9-10052B | 75042 | TRW INCTRW ELECTRONIC COMPONENTS |
| MEA100-5K0-1T9 | 07716 | TRW INCTRW IRC FIXED RESISTORS/BURLINGTON |
Technical Data | NSN 5905-00-830-4616
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 100.500 KILOHMS |
| RESISTANCE TOLERANCE IN PERCENT | M0.100/P0.100 |
| POWER DISSIPATION RATING IN WATTS | 125.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 70.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M25.0/P25.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P165.0 |
| INCLOSURE METHOD | HERMETICALLY SEALED |
| STYLE DESIGNATOR | 4 AXIAL TERMINAL EACH END |
| BODY DIAMETER | 0.130 INCHES NOMINAL |
| BODY LENGTH | 0.406 INCHES NOMINAL |
| TERMINAL TYPE | WIRE LEAD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 97942-577R072H27 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |