Part Details | FILM FIXED RESISTOR NETWORK
5905-00-857-8571 An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
Alternate Parts: 3018741, 301874-1, 5905-00-857-8571, 00-857-8571, 5905008578571, 008578571
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 29, 1972 | 00-857-8571 | 32068 ( RESISTOR NETWORK, FIXED, FILM ) |
REFERENCE DRAWINGS & PICTURES
ISOLATED ARRAY
TERMINALS ONE END
Cross Reference | NSN 5905-00-857-8571
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 301874-1 | 22915 | NORTHROP GRUMMAN CORPELECTRONIC SYSTEMS DEFENSIVE SYSTEM |
Technical Data | NSN 5905-00-857-8571
| Characteristic | Specifications |
|---|---|
| CUBIC MEASURE | 0.173 CUBIC INCHES |
| POWER DISSIPATION RATING IN WATTS | 0.100 EACH RESISTOR AND 0.300 EACH RESISTOR AND 0.100 EACH RESISTOR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M50.0/P50.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P125.0 |
| SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 18 TERMINALS ONE END |
| BODY LENGTH | 1.170 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| BODY WIDTH | 0.225 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| BODY HEIGHT | 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| TERMINAL TYPE | PIN |
| TERMINAL QUANTITY | 5 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 1.000 INCHES NOMINAL |
| TEST DATA DOCUMENT | 98453-301874 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |