Part Details | FILM FIXED RESISTOR
5905-01-024-4085 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
Alternate Parts: 5616773, 561677-3, 28415343, 2841534-3, 28415343, 2841534-3, 671AS18, 671AS-18, 5905-01-024-4085, 01-024-4085, 5905010244085, 010244085
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 11, 1976 | 01-024-4085 | 05311 ( RESISTOR, FIXED, FILM ) |
REFERENCE DRAWINGS & PICTURES
TERMINALS ONE END
Cross Reference | NSN 5905-01-024-4085
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 561677-3 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 2841534-3 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 2841534-3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 671AS-18 | 72819 | SANDVIK WIRE AND HEATING TECHNOLOGYCORPORATION |
Technical Data | NSN 5905-01-024-4085
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 830.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M10.000/P10.000 |
| POWER DISSIPATION RATING IN WATTS | 75.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 40.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 208.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 9 TERMINALS ONE END |
| BODY DIAMETER | 1.000 INCHES NOMINAL |
| BODY LENGTH | 8.000 INCHES NOMINAL |
| TERMINAL TYPE | FERRULE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL LENGTH | 0.875 INCHES NOMINAL |
| TEST DATA DOCUMENT | 56232-561677 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |